How to Install Hardwood Floors
Hardwood is one of the countless options you could get for your flooring. Hardwood is naturally beautiful. It complements you home decorations as a whole.
More over, it is durable. It will last for a long period of time. It has a protective finishing that is designed to serve you well.
So, how do you install hardwood floors? There are four basic ways on fastening your hardwood floor.
First way is to nail it down. This is the most dependable way of fastening your hardwood flooring. This insures a more secured positioning of hardwood flooring.
Second manner is to staple it down. To do this process, you must push the staple into the wood flooring. You should consider the right size of staples as set against the size of your hardwood.
You may also glue the hardwood down. This method is also effective. However, it is sticky. Therefore, you should be careful when setting up your hardwood. This is done by spreading the adhesive on the proper sized trowel in order to connect it to the wood flooring.
The next method is called floating. The process is done by applying a thin pad between the wood flooring and the sub floor. Glue is applied on each plank to hold it together.
To install hardwood floors, you should mark the beams that support your floor. Draw a line on the baseboard. Make sure it measures about 3/8 inches. Then find your pattern.
You can do this by checking out the longest straight wall. This is going to be your starting point. Position your board on the baseboard line.
You must ensure that the hardwood and the floor beams are perpendicular to each other. This will ensure that the hardwood flooring is properly supported by the joints.
Fasten your hardwood to the board into the beam. The most recommended way to do it is by nailing the hardwood down. This is especially true for the areas where nail gun could not penetrate through the sub floor and the beam.
Work on fastening the ends of tongue and groove together. You can simultaneously hammer a nail and use gun nail on this task.
Once done, you are now able to install hardwood floors. Make sure that you lay the flooring before you actually nail them. This will give you an overview of its finished look.
Always make sure that you are able to use a considerable amount of nails and staples. This will ensure that your hardwood flooring is properly fastened to the sub-flooring and the beam.
Steps to install hardwood floors are easy. It could be followed without any hassles. The thing that you should ensure is that the floor is properly positioned to the beam.
The purpose of which is to make sure your hardwood flooring is sturdy and properly installed.
